Bumper Show Specifications

Standard | Optional

Standard Specifications Optional Specifications
Length 16’ Length 12’ – 18’
Width 6’ 8” Width 7’, 7’ 6”, 8’
Height 6’ 6” Height 6’, 7’
Nose Configuration ·        Flat Nose

·        3003 Aluminum – 0.100 Thick

o   Welded to Side Posts NOT Riveted

 Nose Configuration ·        Vee Nose

·        Diamond Plate on Lower Portion

·        Black, White, Stainless Overlays
Center Gate ·        One (1) w/ Swing Walk Thru Door

·        Hold Up Blocks – Open & Shut Positions

·        HD Slam Latch – Cast Aluminum

·        Outside Slam Latch Release Handle

·        Four (4) HD Extruded Hinges w/ Replaceable Brass Bushings and Stainless Steel Bolt

 Center Gate ·        Slider Door

·        Air Gaps per Customer’s Request

·        Lo Pro Center Gates
Pen System ILO Center Gate Pen System ILO Center Gate ·        Individual Pens per Customers Request

·        Removable Gates and Center Posts

·        Stainless Steel Rods w/ Safety Stops
Escape Door ·        RH 30” Wide

·        Pressure Latch-Cast Aluminum

 Escape Door ·        LH Side

·        Sealed Escape Door
Rear Gate ·        Double Swing (Both Ways) w/ Window

·        Three (3) HD Strap Hinges per Door

·        Cam Latch w/ Safety Chain

 

 Rear Gate
Side Walls ·        1/8” Extruded 6005A Panels

·        1”x2-1/2” Side Posts on 16” Center

·        Two (2) Top Air Gaps – Approx. 5-1/2” Wide

 Side Walls ·        Air Gaps per Customer Request
Floor ·        Traction Floor – Extruded 1-3/4”x8” Interlocking Tongue and Groove Floor ·        Crimped Extruded Floor
Axles ·        Two (2) Dexter 3,500# on 12’ – 14’ Trailers, Electric Brakes, Grease Hubs, ST225/75Rx15 Tires, Steel Wheels

·        Two (2) Dexter 6,000# on 16’-18’ Trailers Electric Brakes, Grease Hubs, 235/80Rx16 Tires, Steel Wheels

 Axles ·        Easy Lube Hubs

·        Chrome Hub and Nut Covers

·        Aluminum Wheels

·        Stainless Steel Simulators
Fenders ·        Smooth Teardrop Fender Fenders ·        Diamond Tread Teardrop on 6’ 6” Wide

·        8” Board Fender on 7’ Wide Trailer

·        5” Smooth Fender on 7’ 6” Wide Trailer

·        2” Smooth Fender on 8’ Wide Trailer
Vents ·        Two (2) Top 5-1/2” Air Gaps Vents ·        Multiple Air Gaps per Customer Request

·        Optional Bottom 3” Air Gap – No Charge

·        Two Way Roof Vents
Vent Covers Vent Covers ·        Lexan in Any or All Side and Rear Air Gaps

·        Hinged Aluminum Cover Panels

·        Non-Hinged Panels Attached w/ Screws
Lights ·        One (1) Interior Light w/ Switch

·        Two (2) LED Stop/Turn/Tail Lights on Rear

·        2” Round LED Rear Marker Lights

·        ¾” LED Button Side and Front Marker Lights

o   Three Center Front Marker Lights

o   Three Marker Lights Down Each Side

 Lights ·        Two (2) Back Up Lights – 6” LED Oval

·        Two (2) Rear Load Lights – 6” LED Oval

·        Side Roof Rail Lights

·        Above or Below Fender Marker/Turn Lights

·        Additional ¾” LED Side Marker Lights